Teknic homepage
0 |
Teknic, Inc. > Model Information
Your gearbox part number selection has been updated to accurately reflect all specs and pricing. To undo, select the previous gearbox ratio in either location.

CPM-MCPV-N1431P-RLN

NEMA 143 ClearPath-MCPV Model
Gallery Gearbox gallery

Downloads

ClearPath Integral HP 2D Drawings pdf
3D Drawings / Solid Models zip
ClearPath User Manualpdf
About this Product

The ClearPath-MCPV model gives you a simple, low-cost way to precisely control position without needing a separate motion controller or servo drive. ClearPath's innovative servo control algorithm provides excellent tracking accuracy and fast settling time, even with very large inertial loads.

1. Choose a frame size
NEMA 56 cutout
selected
NEMA 56
ClearPath connector cutout
selected
IEC D100
2. Select motor options
Note: Changing any motor options will update your part number
3. Add a gearbox (optional):
In many motion systems, there are two big benefits of using a gearbox: torque multiplication and inertia reduction. If you need a gearbox, select from one of the options below. Not sure? This motion article will explain it in more detail.
Built-to-Order gearboxes are available for this frame size. Changing any gearbox options will alter your gearbox part number.
4. Add Selected Models
Motor Pricing
Qty:1-910-4950-99100-199200+
$898 Register for Volume Pricing
Gearbox Pricing
Qty:1-910-4950-99100-199200+
Register for Volume Pricing
Motor
Gallery
CPM-MCPV-N1431P-RLN
Ships in: 3 Days

Gearbox
gearbox
---
Ships in: 3 Days

Total: $898
Add to Cart
5. Add Required Accessories
Certain accessories are required (e.g. controller cable) to use your ClearPath motor. We also offer several helpful accessories that are optional depending on the nature of your application.

Torque/Speed Data and Specs

Modify the Controls below to update the torque/speed curve for your specific application.
Torque/Speed Curve
Controls
Input Voltages
Torque/Speed Modifiers
Units:
Add Gearing:
None
Teknic Gearboxes
Configure a gearbox in the previous section to view accurate torque/speed curve and specs.
Single-Stage
Double-Stage
Custom/Third-Party Gearing ?
:1
Motor Specifications
Input Voltage110 VAC 1-ph208 VAC 1-ph208 VAC 3-ph230 VAC 1-ph230 VAC 3-ph380 VAC 5-w415 VAC 5-w
Peak Torque
Cont. (RMS) Torque
Max Speed
Motor Peak Power
Motor Cont. (RMS) Power

More Specifications

Motor Frame SizeNEMA 143 - 7.47 in (189.74 mm) sq.
Length9.22 in (234.19 mm)
Input Voltage Range
Input Voltage for 5-wire systems		100-240 VAC (1- or 3-phase)
300-415 VAC (3-phase, 5-wire)
Achievable Resolution 0.090 degrees(0.012 deg. w/ Enhanced option)
Repeatability 0.006 degrees
Shaft Diameter1 0.875 in (22.23 mm)
Weight25.2 lb (11.4 kg)
Rotor Inertia103.9 oz-in² (19.0 kg-cm²)
Controller Signal I/O Voltage Range4.0 to 28 VDC
Maximum Radial Load 170 lbf (756.2 N)
Maximum Thrust Load40 lbf (177.9 N) in; 70 lbf (311.4 N) out
Ambient Temperature2-40° to +70° C
Ambient Humidity 0-95%; non-condensing
Environmental Protection (IP Rating) IP67/66K
Regulatory CertificationsUL Listed for use up to 240 VAC;
CE certified for use up to 415 VAC; RoHS
Country of OriginUSA
Warranty3 Years

1 A NEMA 56 option with a shaft diameter of 0.625 in (15.88 mm) is also available. This part is available here.

2The RMS torque limit on certain motors is derated for operation in ambient temperatures above +40 degrees C. Contact Teknic for derating assistance.

Output Shaft Diameter---
Weight---
Efficiency---
Backlash---
Nominal Torque Output---
Maximum Acceleration Torque1---
E-stop Torque---
Nominal Input Speed3000 RPM
Maximum Input Speed6000 RPM
Gearbox Inertia---
Maximum Radial Load---
Maximum Axial Load---
Environmental RatingIP54
Ambient Operating Temperature-15°C to 90°C
Minimum Service Life20000 hours
Audible Noise---
Grease TypeSynthetic grease
Country of OriginChina
Warranty1 year

1 Ensure the gearbox's maximum acceleration torque meets or exceeds your motor's peak torque rating, or torque limit the motor accordingly.

Operating Mode Videos

loading

By changing digital inputs (from your PLC, switches, etc.), ClearPath will smoothly ramp to one of four preset speeds in either direction.
watch video
Fine control of speed from zero to max speed at the turn of a knob. Remembers your last set speed or resets to zero speed when motor is enabled.
watch video
Just turn on power and smoothly ramp to your preset speed. For when all you need is reliable, constant speed from a brushless motor, and a bare minimum of wiring. It doesn't get any easier than this.
watch video
Connect a digital waveform from your PLC or other device, and ClearPath will run at a speed proportional to the waveform. Or, connect the PWM output of an H-bridge drive of a DC brush motor setup to make a high-performance, drop-in replacement.
watch video
Apply a variable torque (or force or tension) in proportion to a digital command (PWM or frequency).
watch video
Trigger ClearPath to move in either direction and it will smoothly ramp up to a chosen speed and stop when it detects a sensor (or switch).
watch video
Trigger ClearPath to move to one of the two preset positions. Perfect for replacing air cylinders that move between two positions, but where more power and finesse is needed.
watch video
ClearPath will move at a user-defined velocity to a position proportional to the frequency or PWM duty cycle of a digital waveform.
watch video
Use a timer/counter on your PLC (or a simple circuit) to send a burst of pulses to ClearPath, and it will move a distance proportional to the number of pulses sent, at your pre-selected speed and acceleration.
watch video
Trigger ClearPath to move a user-defined distance (one of four) from its current position. You can also send multiple, quick trigger pulses to tell ClearPath to travel a multiple of any of its user-defined distances in one smooth move.
watch video
Trigger ClearPath to move to one of four preset positions. Perfect for replacing air cylinders where more power and finesse is needed.
watch video
Trigger ClearPath to move to one of 16 positions from a user-defined reference position.
watch video
Define multiple positions using sensors or switches, and trigger ClearPath to start moving and continue until it sees the next sensor transition (or a user-specified number of sensor transitions).
watch video
ClearPath Accessories
Accessories Guide

ClearCore

I/O and Motion Controller

ClearCore accessory

ClearCore is an industrial C++ programmable I/O and motion controller with four motion axes, analog and digital I/O, serial ports, and XBee wireless comms for Industrial IoT. Expand ClearCore for large, multi-axis systems.

Learn More

ASU

Analog Send Unit

ASU accessory

This Analog Send Unit (ASU) allows you to use analog control signals (0-10V or 4-20mA) while minimizing associated noise issues. The ASU converts analog signals to digital signals compatible with ClearPath-MC, so you won't have noise corruption.

Learn More

Controller Cables

10-ft and 55-ft Motor Power Cables

Controller Cables accessory

This cable connects your control signals to the ClearPath motor. The controller cable requires an 8-pin Molex Mini-fit connector on the ClearPath end.

Learn More

Gearboxes

Planetary Gearboxes

Gearboxes accessory

Configure inline or right-angle gearboxes available in multiple frame sizes, gear ratios, and output-flange configurations for maximum mounting flexibility. Select models ship in 3 days; built-to-order options ship in 4-6 weeks.

Learn More

Logic Backup Power

24 VDC Power Supply

Logic Backup Power accessory

General purpose, 156 watt, logic power supply; can be used to power ClearCore/ClearLink controllers, SC4-HUB, ASU-FR510 analog controller, or ClearPath servo motors.

Learn More

Blower Kit

AC Powered Fan and Shroud

Blower Kit accessory

The blower kit (AC powered fan and shroud) provides a significant increase in continuous torque for certain AC-input ClearPath motors.

Learn More

RES-225

Regenerate Energy Shunt

RES-225 accessory

For applications that cause significant regenerated energy, the regenerated energy shunt can be used to monitor and manage your motor's regenerative energy.

Learn More

Foot Mount

Mount and Screw Kit

Foot Mount accessory

This optional rigid base for AC-input ClearPath motors allows foot mounting (on one of three sides) in addition to standard face mounting.

Learn More

USB Setup Cable

USB Setup Cable

USB Setup Cable accessory

The USB cable connects the ClearPath motor to a Windows PC for initial setup and/or diagnostics.

Learn More

MSP

Motor Setup Program

MSP accessory

This "Motor Setup Program" software is used for initial ClearPath setup and diagnostics. You can download MSP from Teknic for free.

Learn More
Successfully added to your cart
Gallery
Required Accessories
Certain accessories are required to use your ClearPath motor. The Accessories Guide will assist you in buying all of the required and optional accessories for your specific motor.
Accessories Guide

AC Blower Kit

Blower Kit

Blower Kit
Part Number: BLOWER-1P230V
Connector: Screw Terminal Block
Length: Adds 2.12 in to motor length (see manual/3D models for specifics)
Input Power: Single-phase 190-230 VAC
Weight: 2.0 lbs

This blower kit (AC powered fan and shroud) provides a significant increase in continuous torque for certain AC-input (integral hp) ClearPath motors. Motor part numbers shown with a “_fan” after them show the increased specifications using this blower. Note that this kit is not IP rated for dust or liquid protection, and needs AC wiring separate from the motor. For wiring and installation instructions, refer to the user manual: AC Input, Integral Horsepower ClearPath Motors
Qty 1-9Qty 10-49Qty 50-99Qty 100-199Qty 200+
$57$56$55$54CONTACT
Share / Save Cart