HDSN-CABLE-120

This is a cable to connect a Hudson brushless servo motor (with the Molex connector option) to any compatible servo drive.

This cable has a mating Molex connector on the drive end (instead of "flying leads") to allow us to electrically test every cable before it ships. Most users will cut off this connector to wire the cable to their specific motor drive connector(s), but if you happen to need a motor extension cable longer than 10 feet, you can leave this connector on to daisy-chain 2 or 3 of these cables end-to-end.

Don't worry about cutting or modifying this cable. For any Hudson motor you return under our 90-day return policy (applies to Fast-ship models only), we will allow you to also return a motor cable as well, even if you have cut or modified it. You will still get a full refund on the cable.

Do not modify the motor pigtail in order to connect it directly to your drive. Modifications to the motor pigtail itself void the motor warranty and the 90-day return policy on Fast-ship motors.