ClearPath® Accessories

Power Supplies

350/500 Watt DC Power Supply

350/500 Watt DC Power Supply
Part Number: IPC-5
Output: 75 VDC, 350 W cont. (500 W fan-cooled), 900 W peak
Input: 108-250 VAC
Connectors: 8-pin Molex Mini-fit (input) and 2-pin Sabre (output)
Dimensions, in (mm): 7.20 (183) x 5.20 (132) x 2.26 (57.3)
Weight, lbs (kg): 2.25 (1.02)
Certifications: UL, CE

More ►

Low Voltage (75 VDC) "Intelligent Power Center" power supply optimized for motor drive bus power. Compatible with ClearPath NEMA 23 and 34 integrated servos, and Eclipse and Meridian 2xx-5xx series products.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$248 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

225 Watt DC Power Supply

225 Watt DC Power Supply
Part Number: IPC-3
Output: 75 VDC, 225 W cont., 900 W peak
Input: 108-250 VAC
Connectors: 8-pin Molex Mini-fit (input) and 2-pin Sabre (output)
Dimensions, in (mm): 7.13 (181) x 5.20 (132) x 2.26 (57.3)
Weight, lbs (kg): 2.11 (0.96)
Certifications: UL, CE

More ►

Low Voltage (75 VDC) "Intelligent Power Center" power supply optimized for motor drive bus power. Compatible with ClearPath NEMA 23 and 34 integrated servos, and Eclipse and Meridian 2xx-5xx series products.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$199 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

Cables

AC Power Cable for IPC-3 and IPC-5

AC Power Cable for IPC-3 and IPC-5
Part Number: IPC35-CABLE110
Connectors: 8-pin Molex Mini-fit to U.S. standard 3-prong 120V AC plug (NEMA 5-15)
Length: 1.98 m (6.5 ft)

AC Power (120VAC) Cable for IPC-3 and IPC-5 motor drive power supplies.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$14 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

Controller Cable, 10 ft

Controller Cable, 10 ft
Part Number: CPM-CABLE-CTRL-MU120
Connectors: 8-pin Molex Mini-fit to 8-pin Molex Mini-fit (one connector is overmolded)
Length: 3.05 m (10 ft)

This cable connects your digital control signals (from switches, buttons, PLCs, etc.) to your ClearPath motor. The overmolded Molex connector connects to the motor (which allows an IP-65 sealed connection when used with dielectric grease), and the other end can be plugged into a breakout board (or an SC4-HUB, if you’re using ClearPath-SC), or it can be cut off to create flying leads to allow you to wire into any control device you may use.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$23 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

Controller Cable, 55 ft

Controller Cable, 55 ft
Part Number: CPM-CABLE-CTRL-MM660
Connectors: 8-pin Molex Mini-fit to 8-pin Molex Mini-fit
Length: 16.775 m (55 ft)

This cable connects your digital control signals (from switches, buttons, PLCs, etc.) to your ClearPath motor. The overmolded Molex connector connects to the motor (which allows an IP-65 sealed connection when used with dielectric grease), and the other end can be plugged into a breakout board (or an SC4-HUB, if you’re using ClearPath-SC), or it can be cut off to create flying leads to allow you to wire into any control device you may use.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$112 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

DC Power Cable, IPC (or hub) to ClearPath, 10 ft

DC Power Cable, IPC (or hub) to ClearPath, 10 ft
Part Number: CPM-CABLE-PWR-MS120
Connectors: 4-pin Molex Mini-fit to 2-pin Sabre
Length: 3.05 m (10 ft)

Cable used to supply bus power from a DC power supply to a ClearPath motor. The Molex end connects to the ClearPath motor; the Sabre end connects directly to a Teknic IPC-5 or IPC-3 power supply, or to a or POWER4-HUB power distribution hub, but can be cut off if you intend to wire it to another supply.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$19 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

DC Power Cable, ClearPath generic, 55 ft

DC Power Cable, ClearPath generic, 55 ft
Part Number: CPM-CABLE-PWR-MM660
Connectors: 4-pin Molex Mini-fit to 4-pin Molex Mini-fit
Length: 16.775 m (55 ft)

Cable used to supply bus power from a DC power supply to a ClearPath motor. It has ClearPath power connectors on both ends, so it is designed to be be cut to make two shorter cables or one long cable, with flying leads at one end. (Note: this is only a 2-wire cable, so it is not suitable for use as the analog input cable on an ASU-FR510.)
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$85 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

24 Volt Power, 2-Pin Molex Cable

24 Volt Power, 2-Pin Molex Cable
Part Number: CPM-CABLE-M2P2P-120
Connectors: 2-pin Molex to 2-pin Molex
Length: 10 ft

Cable used to supply 24 volt logic power to a number of ClearPath devices (e.g., SC4-HUB power, daisy-chained power from SC4-HUB to SC4-HUB, ASU-FR510, power from POWER4-HUB to SC4-HUB, etc.) Can be cut in half to make two shorter cables with flying leads.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$13 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

DC Power Cable, IPC to POWER4-HUB, 6 ft

DC Power Cable, IPC to POWER4-HUB, 6 ft
Part Number: PC-SBR-72
Connectors: 2-pin Sabre to 2-pin Sabre
Length: 1.89 meters (6 ft)

Cable used to supply 75 volt bus power from an IPC-5 or IPC-3 to a ClearPath-SC power distribution hub (e.g., POWER4-HUB) or to daisy-chain two power distribution hubs.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$18 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

I/O Cable, 4-Pin Molex

I/O Cable, 4-Pin Molex
Part Number: CPM-CABLE-M4P4P-120
Connectors: 4-pin Molex Mini-fit to 4-pin Molex Mini-fit
Length: 10 ft

Cable used to connect an analog input to an ASU-FR510 Analog Send Unit (analog to digital converter). This cable uses 22 AWG wire and so is not suitable for use as a DC power cable for a ClearPath motor.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$14 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

USB Cable, for ClearPath Rear USB Port

USB Cable, for ClearPath Rear USB Port
Part Number: CPM-CABLE-USB-120
Connectors: USB 2.0 A to Micro-B
Length: 3.05 meters (10 ft)

Cable used to connect a ClearPath-MC or -SD motor to a Windows PC in order to configure the motor using the ClearPath MSP software. Once configured, the motor is disconnected from the PC, so you only need one of these cables no matter how many ClearPath motors you buy. This cable can also be used to connect to the rear diagnostic port of a ClearPath-SC motor.)
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$9 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

USB Cable, for SC4-HUB to USB Port

USB Cable, for SC4-HUB to USB Port
Part Number: CPM-CABLE-USB-120AB
Connectors: USB 2.0 A to B
Length: 3.05 m (10 ft)

Cable used to connect your host PC to a ClearPath-SC communication hub (e.g., SC4-HUB). Note: this cable cannot be used with ClearPath-MC or -SD series models; for those, use CPM-CABLE-USB-120 (which has a micro-B connector).
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$9 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

ClearPath Power Distribution Hub

DC Power Distribution Hub

DC Power Distribution Hub
Part Number: POWER4-HUB
Input: Bus Power: 24-75 volts (nominal);
Logic Power: 15-30 volts
Output: Distributes the applied input voltages
Connectors: Bus: 2-pin Sabre; Logic: 2-pin Molex MiniFit Jr. See drawing
Dimensions, in (mm): 3.06 x 4.12 (77.7 x 104.7)
Certifications: UL, CE (pending)

Distributes DC bus power to up to four ClearPath-SC motors. Requires 24 volt power to operate (in addition to bus power). For ClearPath-SC systems, the Power Hub also acts as logic power backup for the motors, i.e., the motors will still retain encoder position and communication ability even with bus power removed (for safety during an E-stop, for example). This product is for use only with the ClearPath-SC and is not for use with ClearPath-MC or -SD motors.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$49 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

ClearPath-SC Communication Hub

Communication Hub for ClearPath-SC Series

Communication Hub for ClearPath-SC Series
Part Number: SC4-HUB
Input: 15-30 volts
Connectors: See drawing
Dimensions, in (mm): 3.56 x 5.31 (90.4 x 134.9)
Certifications: UL, CE (pending)

Required for ClearPath-SC systems. Provides network connection for up to four axes. Up to four SC hubs can be daisy-chained to create networks of up to 16 axes (per COM port). Automatic brake control outputs are provided (max of two per daisy-chain). One digital input is provided to stop all axes simultaneously.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$49 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

Analog to Digital Converter

Analog Send Unit

Analog Send Unit
Part Number: ASU-FR510
Connectors: Molex Mini-fit (8, 4 and 2-pin)
Dimensions, in (mm): 4.63 (117.6) x 2.09 (53.1) x 1.45 (36.8)
DC Input Power: 15-30 VDC

PDF Icon User Manual

Need to use analog control signals? For maximum noise immunity, ClearPath-MC natively uses digital control signals, but this “Analog Send Unit” (ASU) allows you to use analog control signals (0-10V or 4-20mA) while minimizing associated noise issues. The ASU converts analog signals to digital signals compatible with ClearPath-MC, so you won’t have noise corruption. Just locate the ASU as close as possible to your analog source and send the accurately converted digital signals to ClearPath’s optically isolated inputs for high-fidelity control.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
$59 REQUIRES QUICK REGISTRATION CONTACT

Quantities up to 5 will ship within 3 business days. Quantities greater than 5 will ship within three weeks.

Software

ClearPath MSP

Motor Setup Program
Part Number: CPM-MSP
OS Compatibility: Windows 7, 8.1, 10

This software is used to customize your ClearPath-MC or -SD motor for your application. It also provides simple, but powerful diagnostic tools to help you measure how well your motor is performing and diagnose problems you may have with the motor or mechanics. You get an unlimited license to copy and use this software upon your first purchase of a ClearPath motor.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
Free Download
Download
ClearPath ClearView

ClearPath-SC Series Setup Software
Part Number: CPM-CLEARVIEW
OS Compatibility: Windows 7, 8.1, 10

This software is used to manually control and configure your ClearPath-SC motors. It also provides simple, but powerful diagnostic tools to help you measure how well your motors are performing and diagnose problems you may have with a motor or your mechanics. The install also includes a full C++ motion control class library. You get an unlimited license to copy and use this software upon your first purchase of a ClearPath-SC motor.
Qty 1-9 Qty 10-49 Qty 50-99 Qty 100-199 Qty 200+
Free Download
Download

International Orders

ClearPath International Shipping Policies

International OEM customers (annual purchases greater than 320 units) can purchase products through Teknic's OEM sales channel. Please fill out our contact form or call us at (585) 784-7454.

Unfortunately, at this time, we can not take international orders via this website. We hope to be able to do so in the near future. We're sorry for any inconvenience.