Teknic homepage

Motor Selection

Hudson Brushless Servo Motors: Build-to-Order (Ships in 3 weeks)

wpDataTable with provided ID not found!

1Brushless servo motors have sinusoidal current flow. There are two ways to measure one amp in a sinusoid. Method one measures peak to peak of the sine wave. Method two measures the average current flow. If the amplifier manufacturer defines an amp in peak to peak terms, use this Kt value. If the amplifier manufacturer defines one amp using the average method, multiply this Kt value by 1.414.

2A motor amplifier must have enough current and voltage to generate the rated motor power. The voltage provided in this column is the minimum voltage required to enable full motor power. More voltage can be safely used up to 340 VDC. If less voltage is used, maximum peak power is reduced. Click on a motor part number link to see the voltage impact (and amplifier current requirements) on the motor's T/S curve.

OEM Specs and Pricing

Note: Most of these part numbers are not available for online purchase.
Please contact Teknic with any questions.